Results 1 to 12 of 12
  1. #1
    Member
    Join Date
    Jul 2005
    Location
    Genesee Michigan
    Posts
    103

    Dash Mount Graphs Older Legend

    Anybody ever come up with anything on mounting a larger graph like a HDS9 or even dual 9's on the older Legend boat. I have a 07 Legend LE-21DC and can't seem to find anything. Just wondering and interested in some ideas and pic if anyone has.

  2. Member
    Join Date
    Nov 2016
    Location
    Murfreesboro Tennessee
    Posts
    28
    #2
    Used a gray cutting board from Walmart for the dash plate. Pretty easy install. Had to make a 1 inch steering wheel spacer. Only bad thing is i can't see my gauges.
    Attached Images Attached Images

  3. Member
    Join Date
    Jul 2005
    Location
    Genesee Michigan
    Posts
    103
    #3
    Quote Originally Posted by Brittjoyce View Post
    Used a gray cutting board from Walmart for the dash plate. Pretty easy install. Had to make a 1 inch steering wheel spacer. Only bad thing is i can't see my gauges.
    Thanks for the pic. I have a different model and dash. What’s behind you plate do you have fiberglass or the plastic covering? Mine has plastic with vinyl then a hard shell plastic over top of it.

  4. Member
    Join Date
    Apr 2018
    Location
    Fort Worth TX
    Posts
    137
    #4
    Again different boat but I imagine you could something similar
    I actually bought a dual graph mount from a Triton on here
    Ditched the triton plate cut out a plate matching the factory plastic bezel
    Also all the gauges are run through the HDS now so no more gauges

    20190515_212738.jpg
    20190425_184616.jpg
    20190425_122803.jpg
    20190425_231406.jpg

  5. Member
    Join Date
    Jul 2005
    Location
    Genesee Michigan
    Posts
    103
    #5
    Quote Originally Posted by b00stin4 View Post
    Again different boat but I imagine you could something similar
    I actually bought a dual graph mount from a Triton on here
    Ditched the triton plate cut out a plate matching the factory plastic bezel
    Also all the gauges are run through the HDS now so no more gauges

    20190515_212738.jpg
    20190425_184616.jpg
    20190425_122803.jpg
    20190425_231406.jpg
    Thanks for the pictures. Behind my plastic is more plastic and not a solid mounting system. I was thinking some L brackets to grab the mount and it would be a little more solid. Thanks for sharing.

  6. Member
    Join Date
    Nov 2016
    Location
    Murfreesboro Tennessee
    Posts
    28
    #6
    Dash plate, vinyl, then fiberglass. It's in there pretty good. Good luck with you mount.

  7. Member
    Join Date
    Nov 2016
    Location
    Murfreesboro Tennessee
    Posts
    28
    #7
    Thanks bOOstin4. I'm going to look into gauges on my graphics. Never thought about doing it.

  8. Member
    Join Date
    Jul 2005
    Location
    Genesee Michigan
    Posts
    103
    #8
    Quote Originally Posted by Brittjoyce View Post
    Thanks bOOstin4. I'm going to look into gauges on my graphics. Never thought about doing it.
    I have also added digital gauges but the Etech gauge has several different warning lights on it and also i need the gauge to winterize the boat. I like the idea but i have to come up with a support because the fiberglass stops at the wheel and is all plastic up top.

  9. Member
    Join Date
    Apr 2018
    Location
    Fort Worth TX
    Posts
    137
    #9
    Yea literally everything can be run through the hds unit minus I havent found a way to run the jack plate gauge and didnt want to cut any holes in the fiberglass for it...
    Was thinking about just mouning it in the aluminum somewhere that I could kind of see it lol
    For mercury there is a gateway specific to the type of motor you have and on the 4 stroke drive by wire system I believe you can setup cruise control and stuff through it
    I'm not sure what is available for yamaha motors or humminbird/garmin units

  10. Member
    Join Date
    Feb 2011
    Location
    Convent La.
    Posts
    136
    #10
    Bass boat Technologies. Van will have what you need. Love my mount in a 191...Live 9.

  11. Member BOW4UM's Avatar
    Join Date
    Mar 2015
    Location
    Body in North GA (Lake Lanier) - Heart in KS
    Posts
    2,186
    #11
    Nice!
    2008 ChampioN 198 / 225 Opti ProXS! 1999 187 DC Elite / Merc 175 efi & 1989 184 DCR /Merc 175 xri

  12. Member
    Join Date
    Jul 2005
    Location
    Genesee Michigan
    Posts
    103
    #12
    191Benny Can you share a pic of the setup for me?