AutoChart Live Marking Blue

[2marshall8]

Anyone know why autochart live marks these blue areas? thanks

[2marshall8]

nvm figured it out finally. I had bottom layer on visible. i put i ton hidden and it's colored right

[ky2200]

thanks for posting .. mine has done same thing ,,, couldn't figure it out …

[Sirius Rich]

I had the same issue, but kept driving over the “blue” areas until they colored. That worked for all but two small spots near the shoreline.

[Wallace]

FYI you can also turn off the color on the map and lay the hardness mapping overtop of the colorless map and you have hardness scale and the contours both show and you don’t have to mess with the transparency .

[2marshall8]

FYI you can also turn off the color on the map and lay the hardness mapping overtop of the colorless map and you have hardness scale and the contours both show and you don’t have to mess with the transparency .

Good Tip. Yah, I'll play with that bottom hardness feature some more also. It's Interesting. It seems that tightening the min and max scale will show much stronger color differences between different levels of hardness.