Results 1 to 15 of 15
  1. #1
    Member KHNC's Avatar
    Join Date
    May 2016
    Location
    Hendersonville NC
    Posts
    868

    Tough couple of months!

    Took the boat down to Lake Talquin end of January. Hit something under water as i was loading the boat, cracked the lower unit near the nose cone. Insurance company only wanted to replace the case as internal "appeared" to be fine. Mechanic changed it all out and no warranty due to reusing same internal parts. First week of March, powerhead busted a crank shaft. This head is only two years old, but out of warranty. Had to pay to replace the powerhead. Go through the break in process again. Just barely finished break in and last weekend the shaft in the lower unit breaks just below the water pump! This required a whole NEW lower unit to repair. Now my engine is pretty much brand new again. Insurance fortunately did a supplement after talking to the shop. They are paying for the new LU. Hoping to pick the boat up Wednesday. I dont even trust the motor a little bit at this point. Since its prime fishing season in the south now, I hope to rebuild some confidence in it soon! Ready to be done with all these issues!

    Anybody catching any good bass? We have had a few good trips in between break downs.
    2022 Blazer 675 Ultimate
    2022 Merc 300 Pro XS
    2017 YZ250F
    Kenny Hollingsworth<<<<<<<<<MY NAME!
    828 674 6752
    Hendersonville NC<<<<MY LOCATION!!

  2. Member WVBullet's Avatar
    Join Date
    Oct 2015
    Location
    Gallipolis Ferry, West Virginia
    Posts
    15,065
    #2
    Dang Kenny, that’s a load of bad things in such a short time. That’d make me gun shy too! Hope all is lined out now!

    2008 BULLET 21XD 2007 Merc 300xs


  3. Member KHNC's Avatar
    Join Date
    May 2016
    Location
    Hendersonville NC
    Posts
    868
    #3
    Thanks! Getting it back wednesday afternoon. Going to head down to Lake Murray this weekend. Hopefully all is well!
    2022 Blazer 675 Ultimate
    2022 Merc 300 Pro XS
    2017 YZ250F
    Kenny Hollingsworth<<<<<<<<<MY NAME!
    828 674 6752
    Hendersonville NC<<<<MY LOCATION!!

  4. Member
    Join Date
    Mar 2008
    Location
    KINGSPORT, TN
    Posts
    3,081
    #4
    Hate to hear this. Is Greg doing the repair work?? If so he will fix you up
    2005 21XD W/ 2005 MERC 250XS BULLET TOTAL PERFORMANCE BOAT!!

  5. Member
    Join Date
    Oct 2017
    Location
    Mobile, Alabama
    Posts
    6,606
    #5
    Lake Talquin is loaded with stumps and logs. Lake Seminole is too.
    2020 Triton 18 TRX
    Tournament Fishing Package
    2020 Mercury 200 Pro XS V8 Serial # 2B588923
    Minn Kota Ultrex 80# I Pilot Link
    Hi Jacker EZ 6" Jack Plate
    Bravo 1 FS 24 Pitch Prop
    Humminbird Helix 7 SI GPS CHIRP G2 Bow
    Humminbird Helix 7 CHIRP MEGA GPS DI G3 Console
    Trick Step Boarding Steps
    RMP Engine Support

  6. Member
    Join Date
    Mar 2006
    Location
    Wilmington, MA
    Posts
    2,247
    #6
    Please tell me it's not a Yamaha !
    ​BULLET 21XRS 250 SHO

  7. Member
    Join Date
    Jul 2012
    Location
    Maumelle, AR.
    Posts
    5,418
    #7
    They don't make them like they used to, had less problems with my 2004 than I've already have with my 2016

  8. Member KHNC's Avatar
    Join Date
    May 2016
    Location
    Hendersonville NC
    Posts
    868
    #8
    Yes, Greg has it again now. Its a Merc 250 Pro XS with TM Gen 1 lower. New powerhead two years ago when i bought it. First time in 30 years of boat ownership i have had an issue with a lower unit breaking the main shaft. At least i have a one year warranty on the whole motor again.
    2022 Blazer 675 Ultimate
    2022 Merc 300 Pro XS
    2017 YZ250F
    Kenny Hollingsworth<<<<<<<<<MY NAME!
    828 674 6752
    Hendersonville NC<<<<MY LOCATION!!

  9. Member
    Join Date
    Apr 2007
    Location
    Pilot Point, TX
    Posts
    441
    #9
    Quote Originally Posted by Bullet 250 View Post
    They don't make them like they used to, had less problems with my 2004 than I've already have with my 2016
    Tell me about it. My boat is in the shop for the third time this year. I don't think my 04 was in that much in 11 years. Currently getting a new compressor.

  10. Member KHNC's Avatar
    Join Date
    May 2016
    Location
    Hendersonville NC
    Posts
    868
    #10
    i hope we are talking a few years at least! EIther that or it blows up in 11 months. lol.
    2022 Blazer 675 Ultimate
    2022 Merc 300 Pro XS
    2017 YZ250F
    Kenny Hollingsworth<<<<<<<<<MY NAME!
    828 674 6752
    Hendersonville NC<<<<MY LOCATION!!

  11. Member
    Join Date
    Jul 2012
    Location
    Maumelle, AR.
    Posts
    5,418
    #11
    my 2004, Mercury replaced the fuel rails, other than that, I did a Mass air flow sensor and tracker valve

  12. Member
    Join Date
    Apr 2007
    Location
    Pilot Point, TX
    Posts
    441
    #12
    Quote Originally Posted by Bullet 250 View Post
    my 2004, Mercury replaced the fuel rails, other than that, I did a Mass air flow sensor and tracker valve
    Just a tracker valve on mine. 580 hours.

  13. Member
    Join Date
    Mar 2006
    Location
    Wilmington, MA
    Posts
    2,247
    #13
    I had a 2003 300x for 14 years , just maintenance nothing failed at all .
    ​BULLET 21XRS 250 SHO

  14. Member KHNC's Avatar
    Join Date
    May 2016
    Location
    Hendersonville NC
    Posts
    868
    #14
    Well, thats definitely true on the dont make them like they used to. These motors should be MUCH more reliable with proper maintenance. I have used Lucas oil for the past 18 months. Anyone have any issues arise from that? If so, i will go back to Merc Oil on this powerhead.
    2022 Blazer 675 Ultimate
    2022 Merc 300 Pro XS
    2017 YZ250F
    Kenny Hollingsworth<<<<<<<<<MY NAME!
    828 674 6752
    Hendersonville NC<<<<MY LOCATION!!

  15. Member
    Join Date
    Mar 2013
    Location
    Georgia
    Posts
    1,476
    #15
    Yamaha SHO 359 hours not a problem so far. 2011 year model original block I’ve had it since 2013