I have a xi5 that won't turn Lt or Rt from neither console, foot control, or remote. I can hit anchor from either and the prop turn on , but will not turn. What's the problem?
I have a xi5 that won't turn Lt or Rt from neither console, foot control, or remote. I can hit anchor from either and the prop turn on , but will not turn. What's the problem?
Board or turning module. Disconnect the module from the board and put 12 volts on the wires. if it runs it the board. if it don't run it is the module.
Brad are you referring to the board control at the base of the mount? and Is there a schematic of the turn module wiring that shows were to apply the 12volts ? Thanks in advance.
XI5 wiring diagram
XI5 wire diagram0001.pdf
Thanks Brad!!! I applied 12v to (o) Blk & Wht and the transmission turned. Based on that (h) the wireless controller board need to be replaced? Correct? part# 8M0140768
That is correct.
Thanks, part is on the way!
Brad, xi5 works like new! Thanks for the Knowledge!
Same problem happend to me last Friday. Follow the instruvctions and I do have a faulty moterboard.
Somebody knows the part #?
2021 Xi5 72" 80lbs. with the latest dongle update (motor was working super fine)
Model: 940800350
Ser#: 9D476696
According to parts break down it is 8M00140768. He mist a zero above. About $200.00
I have the same issue. When using the remote you can hear the transmission motor cycle on but the motor doesn't move. If I jump 12v directly it turns. Is this still a control board problem even though I hear it come on?