Results 1 to 7 of 7
  1. #1
    rduzac
    Join Date
    Apr 2005
    Location
    San Jose, California
    Posts
    23

    2018 Skeeter FX20, Bearing and Seals

    Does anyone know the Bearings and Seals for FX20 Trailer.
    I noticed I have grease on the inside of one of my wheels which means I probably had a seal go bad.
    Bearings are probably OK.

    Thanks,
    Rene

  2. Member
    Join Date
    Jul 2019
    Location
    Seneca, South Carolina
    Posts
    1,220
    #2
    Are these the Vault hubs?

  3. Member
    Join Date
    Jun 2007
    Location
    SE, PA
    Posts
    1,429
    #3
    I had the same issue when I bought my boat new. Had to take it to the dealer since they didn't (at least at the time) sell the grease and parts to customers. I think they have a 5yr warranty? You might want to double check on that. When they looked at mine, there was a slight kink in the seal. They ended up replacing the entire unit.

  4. Member
    Join Date
    Dec 2010
    Location
    Hot Springs Village
    Posts
    4,175
    #4
    Quote Originally Posted by rduzac View Post
    Does anyone know the Bearings and Seals for FX20 Trailer.
    I noticed I have grease on the inside of one of my wheels which means I probably had a seal go bad.
    Bearings are probably OK.

    Thanks,
    Rene
    Those should be the Vault type. They have a 5 year warranty and if you bought the extended warranty on them I believe it is 8-10 years. If you have the original paper work you can call them and they will send you the parts. When it happened to my 2012 Skeeter I got the parts and took it to the dealer who took care of it otherwise you can replace the parts yourself.
    2021 Skeeter ZX225
    2021 Yamaha SHO 225 VF225LA

  5. rduzac
    Join Date
    Apr 2005
    Location
    San Jose, California
    Posts
    23
    #5
    Thanks Everyone, Do you know if the dealer work is covered or just the parts.
    I will also ask Skeeter.

    Thanks Again,
    Rene

  6. Member
    Join Date
    Feb 2010
    Location
    Plymouth, Pa
    Posts
    1,620
    #6
    Take it to your dealer it's all warrenty work .

  7. BBC SPONSOR r82ranger's Avatar
    Join Date
    May 2008
    Location
    Upper Holland, PA
    Posts
    863
    #7
    Good information I have another question, I have the vault bearings at what point do you change them out or perform maintenance? Is there a time limit