-
Help Identify a Prop?
I have a no-name 4 blade stainless prop that I have no clue what it is.
The barrel is just over 3 and 7/8 inches in diameter.
The ears are about 8 and 3/8 inches long.
The pitch appears to be somewhere in the 25 - 26 inch range.
Total prop diameter appears to be about 13 and 3/4 inches.
It's definitely heavier than an older 25 Trophy SN: 48-825942 25
It uses the old pressed in hub.
Edit: The barrel also flares on the exhaust end.
The only markings on the prop are on the front edge of the barrel and it looks almost hand stamped: V123D5081 CRB
Anyone have any ideas on what the prop might be or who made it?
Thanks in advance.
Last edited by dmoshag; 04-04-2020 at 02:58 AM.
-
Moderator
Could be one of many... Predator, Turbo, PowerTech, etc... I'm guessing PowerTech... Pics can help a lot.
-
-
Moderator
The "J" cup looks like PowerTech or Predator eagle. The Hub looks like a "UN" or "CLU" hub from PowerTech to me. Look close on the barrel for small etching of numbers and letters near the motor side of the prop barrel. PowerTech used to use 5 spoke in the hub, Predator used 3 I think if I remember right.