Has anyone added one of the T&H drain valves on a Bullet ?
Has anyone added one of the T&H drain valves on a Bullet ?
I really wanted to but it looks to be impossible without pulling the tank the way the sump area is designed...……..I may be wrong and someone will be along shortly to tell us how
------Co-founder of Post Derailment, LLC---------
Terry
I installed one in a triton for a guy and he loves it.
You will definitely need to pull the tank on a bullet to do it though.
What is the part number for the drain valve?
‘17 Bullet 21 SDC ‘20 Merc 300R 1.60 SM 1E081012
Put one in my xrs. Was tired of bumping my head on power poles and have back trouble that makes it difficult to bend down and put the plug in. Love it.
Does the T&H remote valve fit into the existing drain plug hole? I see from the photo there is a screw on each side to hold it in once installed.
It did not fit in the drain tube on mine. Had to remove it
BULLET 21XRS 250 SHO
I put a remote drain plug in today , easy job and you don't have to remove the fuel tank , If you are thinking about it do it
BULLET 21XRS 250 SHO
BULLET 21XRS 250 SHO
AV, Can you post a picture of how you mounted the switch and how you ran the cable?
BULLET 21XRS 250 SHO
so I used a fish tape (snake) up through the drain plug hole ,there is a small space to the rear of the tank you can grab the snake and pull it, before you do that sawzal the brass drain plug housing fold it in to pull it out. I then fished the cable out though the hole that was there already for the total scan ducer , looped it right to the lever and put it at an angle my lazy arse can reach with no effort.
BULLET 21XRS 250 SHO