Coin box lid support

[Javman389]

I would like to add this to my lid, would someone be willing to take a few pictures of theirs. I would appreciate it very much.

[jc2bg]

What year/model is your boat, so we can try to provide pictures that will correspond?

[Javman389]

Sorry about that! 2015 Z520C

[jc2bg]

Okay. Let’s see if a pic from my 2018 Z519 helps.

14B2786B-D41F-4636-90CD-00A57DFF2212.jpeg

[Javman389]

Thank you very much.

[blkfalc4]

John, What length and force did you go with?

[randy_almeida]

Sorry about that! 2015 Z520C

If you end up buying something and installing, can you please post the info including part number? I would like to add this to my boat too.

thanks

[jc2bg]

John, What length and force did you go with?

That’s a factory support on my 2018. I suggest asking Ranger Parts what they’d use, or simply getting the support from Ranger.

[Javman389]

I ordered my hardware from Ranger. If I can find the part numbers I'll report it here. I did get those part numbers from an earlier thread here. They ship with no installation instructions.

[saltonman]

On my 2015 118 I had to use a backing plate and bolt through the fiberglass and through a backing plate that I used on the outside of the coin box for the bottom bracket. I had to do this after the screws pulled out.