Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Oct 2013
    Location
    Harrison Arkansas
    Posts
    83

    What part do I need to order

    Can someone here tell me what part I need to order? I broke the bracket that holds transducer to the trolling motor. When I look for the replacement online they all say for a transom mount but this was on the trolling motor. Trying to get pics uploaded
    Attached Images Attached Images

  2. Member
    Join Date
    Aug 2013
    Location
    Houma, Louisiana
    Posts
    15
    #2
    https://www.transducershieldandsaver.com/ Go to this company’s site. Best they make, just look for your model/unit

  3. Member
    Join Date
    Oct 2013
    Location
    Harrison Arkansas
    Posts
    83
    #3
    I may put a guard on it also but what I am looking for is the part that the transducer slides into and then attaches to the trolling motor. Looks like it is a two piece unit so it can be replaced without buying a whole new transducer

  4. Member Nightmare's Avatar
    Join Date
    Mar 2005
    Location
    West Central Ohio
    Posts
    856
    #4
    Is that an HDI transducer? You won't find a "tm model" for that - they're all transom mount. The removable neck that's busted off is made to slide off and go into a strap-on cup that Lowrance markets to use the HDI on the tm instead of transom. You will not find the "neck" portion as a separate and purchasable part. Either find a junk HDI that the neck is still good on to replace with to use with the tm adaptor that you have, or get the cup-type adaptor that the ducer will sit inside of (bottom is cut out) and then strapped to the tm like your current adaptor.

    NOTE: I stand corrected thanks to TC in following post. Appears $30 will set you up.
    Last edited by Nightmare; 03-31-2020 at 06:28 AM. Reason: Correct bad info.

  5. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    5,230
    #5
    The neck with TM-bracket is available as spare parts. If I remember correctly it is the same as for the older DSI, part 000-10262-001.

  6. Member
    Join Date
    Mar 2013
    Location
    Louisiana
    Posts
    288
    #6
    use the transducer shield and there is no need for that part

  7. Member Danrude's Avatar
    Join Date
    Apr 2007
    Location
    Marietta, GA
    Posts
    3,324
    #7
    I think this is what you are looking for. https://www.lowrance.com/lowrance/ty...r-for-skimmer/
    Dan Burnette - Marietta, GA
    Triton 18TRX - 200 HO G2

  8. Member
    Join Date
    Oct 2013
    Location
    Harrison Arkansas
    Posts
    83
    #8
    That looks like a fix thanks to all you guys for helping a brother out