Thread: Deflector pins

Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Apr 2015
    Location
    Lewisburg,Ohio
    Posts
    379

    Deflector pins

    What year did they start putting the longer
    deflector pins in the etecs? I have an 09 250
    and been having plugs carbon up when I
    I do a lot of idling. Thought this might be something
    to look into. I use XD 100. And I just changed the
    thermostats. Thanks

  2. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #2
    2006

    Check exhaust pressure sensor tube for blockage and use a temp gun on each cylinderhead to see if they are about 160 degrees after about 5 minutes of idle. Prop the motor around 5600-5800 rpm

    What model number and what plugs?
    Are they indexed correctly?
    What is the highest fuel pressure reading at all speeds?
    Last edited by SEAHORSE; 04-02-2020 at 01:36 PM.
    -----


    A Technical troubleshooter possessing more tools than talent !