what size heat shrink do i need thinking about putting blue on them to match the boat
what size heat shrink do i need thinking about putting blue on them to match the boat
Measure the diameter of your spike....
1-1/2 will work fine
just did mine yesterday and used a heat gun and 1 inch off of amazon that was $8
hey, that would look really good. please post some pix after you heat shrink them !
DELIVERED 9/16/2019
2020 VEXUS AVX 2080 RED
200 HO G2
ICON 3.5
DUAL CONSOLE
ULTREX 80/45 MDI I-LINK
BOW Solix 10 MEGA 360
Echomap Ultra 106 sv
Panoptix Livescope System
CONSOLE SOLIX 12
IONIC lithium batteries
I did that, get some thicker material, 1" is fine. I got mine from Cable Ties and More. They make heat shrink with adhesive too so you can get that. I recently replaced my spike and the new spike was fully encapsulated with a rubber coating, the old one you needed a spike wrap so anybody that touched it did not get fiberglass splinters in their hands.
I got 1" from Harbour Freight
GO DAWGS
Reply With Quote