I currently have an 96 198 with a 225 Merc Proxs and Atlas JP. i'm not getting the bow lift. Anyone have any thoughts or comments?
I currently have an 96 198 with a 225 Merc Proxs and Atlas JP. i'm not getting the bow lift. Anyone have any thoughts or comments?
Ed R.
2006 ChampioN 198 225 Optimax
I dont carry a lot in my boat. A couple boxes and a couple bags of baits. I fish the same lakes a lot and know what to bring and what not to bring
What prop are you running? I have heard good results with the Fury on the 198. A tempest is a good starting prop as well. Last but not least what is your prop to pad height?
My apologies. That's better than most. My 225 Opitmax is a standard non XS with standard gear case. I run 4 blades, 24 Fury, 25 Fury, 24 TXP OT4, 26 Bravo. the Fury and Bravo I run at 2-3/4" to 2-1/2" below the pad. The TXP at just about 2" below the pad. With the 24s and 26 Bravo I'm right at 5750 my max rpm. The 25 Fury I'm at 5500-5550rpm all run about the same speed loaded 66-67 mph empty alone about 69, 70 on a good day. TXP OT4 by far has the best bow lift and speed, but the worst hole shot.
Just how my sled runs.
Ed R.
2006 ChampioN 198 225 Optimax
What prop?
I'm currently running a tempest pro 25. I have the torque master 2 lower unit. The best i got so far was 69.6 a 5600rpm. I think my motor was just at 3.00
Last edited by Ed R; 03-20-2020 at 06:10 PM.
Ed R.
2006 ChampioN 198 225 Optimax
Is your prop in good shape? May need to be worked!
If it doesn't get on plane pretty fast then you might want to check all your ignition coils. Easy to do with a spark plug tester and muffs; look on YouTube.
198 with a merc needs some more positive trim. Tempest will get the job done right.
Pat Goff
Two degrees from center
of nowhere.
Smithwick TX.