-
Disconnecting hose procedures
I have to disconnect my pumps to move them. Do I need to purge the hoses first and if so, what is the procedure?
Thanks,
Robert
-
BBC SPONSOR/ Shallow Water Anchors Moderator
Steps for removing Power Pole hoses from all Power Pole models.
1) Lower the Power Pole until the spike is 1" from floor.
2) Disconnect Power to the pump
3) Manually force (push) the pole closed and use a zip tie or strap to hold the pole in the closed position ** Watch your fingers for pinch point**
4) Disconnect your Power Pole hoses from the pump.