Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Feb 2018
    Location
    Cataula, GA
    Posts
    1,602

    Disconnecting hose procedures

    I have to disconnect my pumps to move them. Do I need to purge the hoses first and if so, what is the procedure?

    Thanks,

    Robert

  2. BBC SPONSOR/ Shallow Water Anchors Moderator
    Join Date
    Apr 2015
    Location
    New York
    Posts
    10,919
    #2
    Steps for removing Power Pole hoses from all Power Pole models.

    1) Lower the Power Pole until the spike is 1" from floor.
    2) Disconnect Power to the pump
    3) Manually force (push) the pole closed and use a zip tie or strap to hold the pole in the closed position ** Watch your fingers for pinch point**
    4) Disconnect your Power Pole hoses from the pump.