-
2001 blazer 202 pro v setup
I just acquired a fixer upper. It’s a 2001 202 pro v with a 2002 mercury 225x(0t430598) 14” slidemaster. It seems that the jack bolt seized on a previous owner so they cut it off. Does anyone know if I could replace just the jack bolt? From what I’ve seen in other posts individual parts aren’t available so I’m considering a new manual jack plate. Any recommendations for setback or brand?
-
Blazer Boats Moderator
-
-
I had a 2000 202DC. Never ran 15", not saying it's not the ticket. I started with 10" and added 4" spacers and that's where I stopped. If you have TM lower unit you'll end up somewhere around 3/4" below the pad. If you have a SM, you should be 1" above the pad for fishing.