Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Feb 2017
    Location
    Satsuma,Al
    Posts
    56

    2001 blazer 202 pro v setup

    I just acquired a fixer upper. It’s a 2001 202 pro v with a 2002 mercury 225x(0t430598) 14” slidemaster. It seems that the jack bolt seized on a previous owner so they cut it off. Does anyone know if I could replace just the jack bolt? From what I’ve seen in other posts individual parts aren’t available so I’m considering a new manual jack plate. Any recommendations for setback or brand?

  2. Blazer Boats Moderator Rebel1's Avatar
    Join Date
    Jun 2004
    Location
    Taylors, SC
    Posts
    12,712
    #2
    15in Rapid Jack

  3. Member
    Join Date
    Feb 2017
    Location
    Satsuma,Al
    Posts
    56
    #3
    Thanks rebel

  4. Member
    Join Date
    Jun 2004
    Location
    Paulina, La
    Posts
    2,439
    #4
    I had a 2000 202DC. Never ran 15", not saying it's not the ticket. I started with 10" and added 4" spacers and that's where I stopped. If you have TM lower unit you'll end up somewhere around 3/4" below the pad. If you have a SM, you should be 1" above the pad for fishing.