Water pump alignment tool

[Boyd117]

Hey guys,

I'm going to be changing the impeller in my 115 pro xs 1.5l 3 cyl opti serial#2b110331 and was wondering if I required alignment pins for housing installation? Also if there is anything else worth changing while in there.

Thanks

[JOE54]

yes /821571a1

[Rip Bass]

For the pins,you can buy two bolts and cut off the heads. The bolts are probably metric.

[JOE54]

and they would have to be used in small holes in plate a to align

[Boyd117]

I read somewhere the threads are 6mm and the pin body are 7mm

[2dwoods]

I've never need them

[silvertalon]

I just slide in a couple of drill bits that fit. works great. I recommend using something as the gaskets and plate will move when you rotate the driveshaft and will mis align everything. good way to tear a gasket.