Back wash

[DewRonInc]

What is out there to help or almost stop back wash on stroker?

[Strokerdean]

A plate under the jack plate will help but not solve it. I just hit the gas when starting to set down, that helps a lot for me.

[Stroker3.2XS]

I use the throttle as well

[DewRonInc]

I use throttle like crazy have plate under jack plate was wondering if anything else existed.......

[fastglass1]

I know that some have tried putting some kind of air bladder in the setback plate. I used a couple of fenders for a while and I know others that tried a basketball. It helps float the back higher which will reduce the backwash.

[DewRonInc]

I was thinking of putting a 14 inch plate on from 15.5

[Wags]

I have CB Marine hole shot plate when I drop into a spot I lower it and it drops the bow and no water comes over the back.

[DewRonInc]

How does it work bud

[Wags]

How does it work bud

Here is a link for you.

http://www.bbcboards.net/showthread.php?t=647504

[Wags]

And here is a longer video done by a customer...

[DewRonInc]

Talked to chris after I heal just a bit I am going to get one. Seems to be the thing I need......

[Wags]

Talked to chris after I heal just a bit I am going to get one. Seems to be the thing I need......

I love mine, solves all my shallow water fishing issues, plus I can run a big wheel and get on the pad a lot faster.

[DewRonInc]

Couple more weeks I have a oil pump and tank to install along with another pulling other head and check cylinders for turned sleeves and if none install new o rings and head bolts. No sleeves turned all good