What is out there to help or almost stop back wash on stroker?
What is out there to help or almost stop back wash on stroker?
Ron Fears
Stroker/300XS
1E003823
A plate under the jack plate will help but not solve it. I just hit the gas when starting to set down, that helps a lot for me.
I use the throttle as well
I use throttle like crazy have plate under jack plate was wondering if anything else existed.......
Ron Fears
Stroker/300XS
1E003823
I know that some have tried putting some kind of air bladder in the setback plate. I used a couple of fenders for a while and I know others that tried a basketball. It helps float the back higher which will reduce the backwash.
fastglass1
2000 Stroker
2005 250XS
30+ Performer 3 and 30 Performer 4
I was thinking of putting a 14 inch plate on from 15.5
Ron Fears
Stroker/300XS
1E003823
I have CB Marine hole shot plate when I drop into a spot I lower it and it drops the bow and no water comes over the back.
LeaLea
How does it work bud
Ron Fears
Stroker/300XS
1E003823
Here is a link for you.
http://www.bbcboards.net/showthread.php?t=647504
LeaLea
And here is a longer video done by a customer...
LeaLea
Talked to chris after I heal just a bit I am going to get one. Seems to be the thing I need......
Ron Fears
Stroker/300XS
1E003823
LeaLea
Couple more weeks I have a oil pump and tank to install along with another pulling other head and check cylinders for turned sleeves and if none install new o rings and head bolts. No sleeves turned all good
Ron Fears
Stroker/300XS
1E003823