I'm having to replace the wiring harness on my Champion 210 Elite and it's been a while since I've worked on it, and I'm going back together with the switch panel today. So I have 3 wires from the outboard (06 VZ250TLR) to the ignition harness that are external to the engine harness. They are a Green, a Green/Yellow and a Brown/White. The Grn & Grn/Yel plug into a Deutsch type connector and come out as a Gray/Blue (Grn) and a Pink/Blue (Grn/Yel). Those two wires go to the warning indicator LED assy, so one is over temp and the other low oil. Which one is which? The Brown/White comes out of the Deutsch connector and doubles back to another Deutsch connector and disappears into the side of the boat headed forward, so my guess is I'll find it under the console when I crawl under there.

So if you can guide me on the Gray/Blue & Pink/Blue wires on the warning indicator so I can get the lens cover on correctly, I would greatly appreciate it greatly.