Nice! Just downloaded it.
thumbs up.GIF
Nice! Just downloaded it.
thumbs up.GIF
Bullet 21XRS
Mercury Pro XS 250
2018 TRX 18. 2020 Mercury 200 Pro XS V8
2018 TRX 18. 2020 Mercury 200 Pro XS V8
Other Fixes
- Increased target sensitivity in the water column on DownScan
- Some users reported their DownScan not reacquiring the bottom after running on plane, we have improved DownScan bottom lock search to remedy this
- HDS users with HDI transducers connected to Channel 1 have reported no DownScan data showing on screen, this has been corrected
- Added the ability to stop the traditional sonar but continue to ping the DownScan and SideScan from a single transducer
- Some deleted routes were leaving segments on the chart after being deleted, this has been remedied
- Some HDS Live displays were not automatically enabling LiveSight features when powered up with a transducer connected, this has been resolved
2B576211
Is it necessary to do hard reset? Took forever to get my pp connected
Matthew 6:33
2020 921elite
2004TR-21X/2015 250 ProXS
2B112175
I’m curious to see what they fixed on SS3D
Thanks guys..
Soooo...I have HDS LIVE units,nmea 2000, point 1. I need to update each of the units separately? As well as power up the ghost t motor before updating anything?
Then do a hard reset? What does the hard reset do to help after the update?
Would i also need to do the setup again for the point 1?
Saved waypoints etc..
Thanks again for all the help
Basscat P4
1998 Tr-21, 2001 Yamaha 225 OX66
GO DAWGS
Seems remote control from tablet using Link broken :(
I got view-only mode after 20.0 upgrade.
Mine wont let it update. Says I have the current 19.3
2B576211
I did but the unit says my version is current at 19.3
I inserted the card and it wont do anything. We I downloaded the 19.3 it took it
Something is not right for sure. Carbon or Live, right?
If you put the update on a card then put that card in and turn on the unit it should not "say" anything only start the update process. Sounds like the card isn't being recognized or else it would roll right along and update.
2B576211
Ill try again. I had my unit on first then inserted the card
When I inserted the card with the v20 update into my Live, nothing came up on screen for me as well. Need to go on to the homepage, choose "storage" and then pick the card slot where you inserted the update. Then a menu bar should come up with an "upgrade" choice, which should install the software. If you have a Ghost, turn it on before you run update ( no need to deploy the motor) Hope this helps.
Phoenix 921ProXP Mercury 250 ProXS