Anyone put a troll tamer on their ghost? Pics?
If not what are you using to keep it from flopping around when running rough water?
Anyone put a troll tamer on their ghost? Pics?
If not what are you using to keep it from flopping around when running rough water?
The designer has one.
https://www.facebook.com/Lowrance/vi...45212593/?vh=e
Facebook - https://www.facebook.com/lowranceprotips/
YouTube -https://www.youtube.com/c/LowranceProTips
2021 PHOENIX 818 PRO
2021 MERC 175 PROXS
any idea what the part number is for that one?
Not a Lowrance product. My guess is he screwed it in to the bounce post(which is hollow)the ghost already come with.
Facebook - https://www.facebook.com/lowranceprotips/
YouTube -https://www.youtube.com/c/LowranceProTips
2021 PHOENIX 818 PRO
2021 MERC 175 PROXS
Why? Does it just keep from having to use the strap? (Serious question, I have never seen one before.)
Facebook - https://www.facebook.com/lowranceprotips/
YouTube -https://www.youtube.com/c/LowranceProTips
2021 PHOENIX 818 PRO
2021 MERC 175 PROXS
Yep, the bounce post is gonna beat a whole in my deck if I don't do something. With the strap locked down tight, it bounces an easy 3 inches. Besides that, can't be good for the motor to flop around like that.
I sent the video to TH Marine. They confirmed it is not their standard. Suggested I ask Lowrance what they did. LOL
Mine has zero travel also; I made sure I measured closely to remove all bounce as I run the Columbia River. And you should be able to adjust some of it out with the threaded end and lock nut. If you cut it too short you could always order a new rod.
ciao,
Marc
Not sure I could push it high enough and still be able to release the pin to deploy. Would have to push it up until there was a lot of tension on the pin
The Troll Tamer bolt is a 3/8-16. I'm gonna get a tap and tap the bounce post and screw the Troll Tamer Bolt into the bounce post. Pretty sure that's what was done to the one on the video.
Has anyone done this yet?
Edit: I see the Pro tips video, will prolly go that route.
Last edited by BMCD; 08-07-2020 at 02:10 PM.
Bryan McDonough
2023 Nitro Z21 XL
Nitro Team
I have a Troll Tamer on the way - I installed my Ghost and in the driveway locked it down with the provided Factory Bounce Buster - cutting it to length with threads to spare on the top (sticking out of the lug on the mount). I tested several times before I cut and I had maybe .75"-1" of travel without the Bounce Buster (stowed/locked) - it actually barely moved when locked. However after one trip - granted with pretty rough conditions on Lake Michigan - the travel on the mount gradually increased throughout the day to 3-3.5" at least. I was worried I had broken the mount - but everything seems fine - it just now moves way more than it did in the locked/stowed position.
I am hoping that based on what I saw I can tap the factory Bounce Buster rod - using only the bottom of the Troll Tamer (threaded/bolt with locking tip) and the Lock-cup (on deck portion). Troll Tamer needs to make a Tamer-rod that would thread into the Ghost lug on the mount, it could be a 2 minute install. A machinist or anyone with a mill/CNC would laugh at how easy this would be - but since I don't have any CNC Mill or Lathe we'll see if I can tap the factory Bounce Buster rod. If this doesn't work - I am going to just order another one of factory parts and re-cut much longer.
Again - don't have at Troll Tamer yet - but when I do I will post results.
Good luck.
-Jonathan
Jonathan Adkins
2022 Nitro Z21xl 250 ProXS4S
HDSLive12s/Ghost/AT2/G360
Just watched the Facebook video above and I am hoping to reproduce what Lowrance did on the Ghost in the Facebook video. It appears to be just a tapped factory support with the Troll Tamer threaded in.
Good luck.
-Jonathan
Jonathan Adkins
2022 Nitro Z21xl 250 ProXS4S
HDSLive12s/Ghost/AT2/G360
Originally mine had a lot of travel and somewhere I read that the rod should be cut with only one half inch of free play (up and down travel).
This now brings the head of the motor very high off the deck which now my travel cover strap is too short. My Motorguide sat very low to the deck.
Doing that and the strap is fine for me in any rough water.
I have something similar and mine will not move at all even running in white caps at 45..I just had back surgery yesterday, so may be a day before I can get outside and take a pic.
Jimmy
Phoenix 721
12" Bobs Hydro Plate
Mercury 300 Xs
Dave Bush Racing Kit
28.5 Bravo
20200411_205601_0000120200411_205601.jpg That's the way I did mine.
Retired G - Looks very nice - that is exactly what I was planning to do.
James_AZ - thanks for the Tap Size - pretty sure I have one in my box.
Thanks.
-Jonathan
Jonathan Adkins
2022 Nitro Z21xl 250 ProXS4S
HDSLive12s/Ghost/AT2/G360