This is a reminder to the Humminbird Tech Staff that there are Two (2) confirmed bugs in the Solix that have yet to be addressed
Tested on Solix Mega G1 10” and 12” units w/v3.640rB and confirmed by your staff
Default settings except User Mode is set to Custom
Standalone (No Network) – But does have the same issues when networked
FIRST CONFIRMED BUG:
Heading Sensor Offset:
With AS GPS HS Heading sensor GPS antenna
Home >Settings >Network >Under Sensor Port >NEMA 0183(1) >Data Offset >Heading Adjustment
You can turn this option on and adjust the offset Plus or Minus 30 degrees
and you do see this effect the heading line
THE PROBLEM
It does not save this data when the unit is shut off, as soon as you turn the unit on it defaults this option back to the “OFF” configuration
SECOND CONFIRMED BUG:
Temperature Offset:
Home >Settings >Network > Under Sensor Port >Temp Sensor
By turning off the "Auto-Select" you can turn on the Temperature Offset and adjust this number Plus or Minus 15 degrees
THE PROBLEM
It does not actually change/effect the displayed temperature
NOTE:
The only mention of Temperature Offset in the manual is under the NEMA 0183 ports
Home >Settings >Network >Under Sensor Port >NEMA 0183(1) >Data Offset > Temperature Offset
Since this option will not highlight I assume it’s for networked sensors