Results 1 to 14 of 14
  1. #1
    Member
    Join Date
    Jun 2010
    Location
    Madisonville KY
    Posts
    614

    Nitro trailer step handle

    What’s the trick to stop it from vibrating so aggressively on the interstate? Only an inch or so of adjustability up and down on the winch post so I’m not sure that will help. I’m considering mounting it to the actual trailer frame instead of the winch post to see if that helps. Any suggestions?

  2. Member
    Join Date
    Dec 2018
    Location
    Fox Lake IL
    Posts
    991
    #2
    I’ve read before where guys determined a loose bolt or cracked weld. My 16 didn’t vibrate and neither does my 19.

  3. Member
    Join Date
    Feb 2017
    Location
    Houston, TX.
    Posts
    523
    #3
    This may sound crazy, but I balanced the trailer wheels/tires and mine is almost motionless now.
    '17 Nitro Z21, 250ProXS serial # 2B399616, 24p Fury4, 12" Atlas, Apex 16 @ console, Apex 16 & Apex 13 @ bow, Mega 360, Ultrex, 8ft blades

  4. Member
    Join Date
    Jun 2010
    Location
    Madisonville KY
    Posts
    614
    #4
    Mine is a ‘19 z20 and it’s been like this from day one. 2 U-bolts and four 13mm lock nuts is all that holds the whole assembly. I removed it from the trailer for now but I’m sure I’ll put it back on eventually bc I grew to like it a lot.

  5. Member Nailbender8's Avatar
    Join Date
    Jul 2016
    Location
    Jacksonville NC
    Posts
    2,086
    #5
    Mine doesn’t do it too bad but another guy told me his did and he filled his with dry sand. Said it took care of his vibration.
    Craig
    USMC Retired
    2019 Nitro Z18 w/Dual Consoles
    2019 Mercury 175 Pro XS

    Psalm 29:3 The voice of the Lord is upon the waters: the God of glory thundereth: the Lord is upon many waters.

  6. Member
    Join Date
    Aug 2017
    Location
    Eastern KY
    Posts
    126
    #6
    Quote Originally Posted by TXZ21 View Post
    This may sound crazy, but I balanced the trailer wheels/tires and mine is almost motionless now.
    Not crazy at all. Absolutely the right decision. A good set of tires, properly balanced. Also have them check for rim run-out. Often those Chinese manufactured rims can wobble.
    Vic
    Preparedness plus Opportunity = Luck

  7. Member
    Join Date
    Mar 2014
    Location
    San Diego, CA
    Posts
    2,445
    #7
    I just ignore it.
    Chris

    2020 Nitro Z19 Pro w/ 200 ProXS

  8. Dogfish_Jones
    Guest
    #8
    Mine shakes but I ignore it. I do notice it when I glance back in the rear view mirror at times.

  9. Member
    Join Date
    Jul 2017
    Location
    Lower, Alabamer
    Posts
    450
    #9
    I was complaining about it too...then my co-angler just turned up the stereo!

  10. Nitro Boats Moderator BMCD's Avatar
    Join Date
    Jun 2004
    Location
    Brookeland, Texas
    Posts
    17,462
    #10
    Mine shakes, not a big deal. I don't even think about it.
    Bryan McDonough
    2023 Nitro Z21 XL
    Nitro Team

  11. Member
    Join Date
    Dec 2008
    Location
    Wichita, KS
    Posts
    10,956
    #11
    Mine would shake terribly. I had my trailer tires balanced and it took out 90% of the wobble. 2019 z20
    Dale Johnston
    Wichita, KS
    2019 nitro z20, mercury pro xs 250 four stroke

  12. Member
    Join Date
    Jun 2019
    Location
    Nacogdoches, Tx
    Posts
    158
    #12
    Has anybody tried putting a piece of rubber gasket material between the step bracket and the mounting post?
    I am going to look around the garage tomorrow.



    2019 Z19
    200 Merc 4Stroke
    Ultrex I pilot 112 36 volt
    7" Humming bird ram mount on the bow
    9" H bird ram mount at the console
    9" Lowrance in the console

  13. Member Nailbender8's Avatar
    Join Date
    Jul 2016
    Location
    Jacksonville NC
    Posts
    2,086
    #13
    Quote Originally Posted by reelfast View Post
    Has anybody tried putting a piece of rubber gasket material between the step bracket and the mounting post?
    I am going to look around the garage tomorrow.
    Interesting, let us know how this does.
    Craig
    USMC Retired
    2019 Nitro Z18 w/Dual Consoles
    2019 Mercury 175 Pro XS

    Psalm 29:3 The voice of the Lord is upon the waters: the God of glory thundereth: the Lord is upon many waters.

  14. Member
    Join Date
    Feb 2010
    Location
    Olive Branch MS
    Posts
    1,433
    #14
    I always go to a tire shop and have them remove the balance beads they use from the factory and have the tires road force balanced. You'd be surprised how much difference it makes.