SS3D 18.2?

[721Proxs]

Does anyone have a link for it? I have 18.3 on my SS and 18.2 on my Gen3 12...DI is frozen and was told I needed 18.2 on my SS...On the screen is shows S3D-62.1.108 which I think is 18.3?

[alpine4x4]

ftp://software.lowrance.com/Structur...Standard-1.riw

[over slot]

Your freezing issue most likely is coming from the 18.2 in your Gen3. It effects some Gen3. Roll back to 7.0 if you still have trouble.

[721Proxs]

TY both! I have read some other threads and from FB Lowrance group that 18.2 does not play nice on Gen3, so I found a link and downloaded it to sd card. Will roll it back when they are finished putting the new Ghost on next week.

[721Proxs]

I just looked and my screen shot 62.1.108...the link above shows to be 60.1.142....Should I keep the latter version on my SS3D and just roll back my Gen3?

[jagsaw]

Try each version and see what works best for your setup. It's not hard to flash a different version. I think I have all the different firmware on my laptop. Let me know if you need a certain one.

[721Proxs]

Thank you, I got the 7 update for Gen3 I think the 18 is the issue