-
2001 champion 202 transom tips
Anyone got any tips on getting the bottom corners out of the transom. Im in the progress of replacing with seacast and I'm down to the bottom 1/4 and the progress has slowed way down. Iv got a chainsaw and air chisel. Anything else?
-
Member
A grenade may help
-
I used a larger auger bit.....just be careful not to drill too far.
https://www.harborfreight.com/18-in-...-pc-68165.html
-
All the Champion transoms I replaced had a bit of thickened resin in the corners, not all wood.The very corners dip down a bit.