Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Aug 2018
    Location
    Austin texas
    Posts
    20

    2001 champion 202 transom tips

    Anyone got any tips on getting the bottom corners out of the transom. Im in the progress of replacing with seacast and I'm down to the bottom 1/4 and the progress has slowed way down. Iv got a chainsaw and air chisel. Anything else?

  2. Member kcg202champ's Avatar
    Join Date
    Apr 2017
    Location
    Salem, Virginia
    Posts
    863
    #2
    A grenade may help

  3. Member
    Join Date
    Jul 2008
    Location
    Leoma TN
    Posts
    171
    #3
    I used a larger auger bit.....just be careful not to drill too far.

    https://www.harborfreight.com/18-in-...-pc-68165.html

  4. Member
    Join Date
    May 2015
    Location
    Kiln Mississippi
    Posts
    837
    #4
    All the Champion transoms I replaced had a bit of thickened resin in the corners, not all wood.The very corners dip down a bit.