Adding Switches : 2002 Sabre

[dmackaravitz]

I am looking at adding a HB 360 to my Sabre and it will need a few switches added.

I'm wondering if anyone has added a switch panel to a older style Sabre or Pantera.

I would need to add a switch for ethernet hub, and one for the 360 on the bow. Will likely mount a Contura switch at the bow for 360, and I'm looking to see if anyone has added a 3-4 contura switch panel somewhere around their console. Will most likely add an additional Bilge pump switch, and a dedicated recirc/pumpout switch, maybe LED lights down the road.

Any suggestions are appreciated, my best bet is trying to add a switches under the outboard control box, but I am open to other ideas.

TIA

[Jonestrollingmotor]

Follow this link. I use to purchase these from Waytek wire. They clip together so you can chain as many as you want, cut one hole and snap them in. Lips cover "ut-ohs" in the cutting. Switches snap into the holders.
https://www.waytekwire.com/products/1412/Rocker-Switches/&pageSize=36&pg=2