1999 Johnson Faststrike 115 water pump video

[Moose720]

Anyone know of a good video or details instructions on how to replace a water pump and housing for a 1999 johnson faststrike 115? Or similar model motor?

[ChampioNman]

I'm sure there are videos out there but here is a link from the tips sticky http://www.bbcboards.net/showthread.php?t=257951. On your motor you shift to forward and pull the front cotter pin from the linkage bar to the shift arm, disconnect the plastic linkage bar from the shift bar, pull the hitch pin and push the rod towards the carbs. This will disengage the shift pin from the shift rod. You can then remove the bolts from the gear case and then drop the lower. Hint, trim the motor up as far as you can, remove the prop to save weight and take it out of the mid. When installing take a piece of masking tape and secure the lower exhaust housing into the midsection. Use one of the longer bolts to hold the case in place.