Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Oct 2019
    Location
    Breaux Bridge, Louisiana
    Posts
    20

    triton tr19 turbo props

    Has any tried the original Turbo 1 prop on a TR19 with a 175hp on its back.....
    Any comments or suggestions …...
    Thanks Roddy...

  2. Member
    Join Date
    May 2009
    Location
    Hendersonville, TN
    Posts
    4,364
    #2
    What brand motor.

  3. Member
    Join Date
    Oct 2019
    Location
    Breaux Bridge, Louisiana
    Posts
    20
    #3
    An Evinrude 1999 175 Ficht, which runs great.....I have plans to replace motor but until I do, I thought I would play with this and see if I could get some difference between the Turbo 3 blade and what is on there now; a 4-blade Renegade.....

  4. Member Stratos21XL's Avatar
    Join Date
    Jan 2011
    Location
    Tennessee
    Posts
    2,107
    #4
    Never ran the Turbo 1 but both the regular TXP and the Lightning are great props. They have great lift and you can run them higher than most props without worrying about them slinging blades. They run a little on the stiff side compared to other props so if you are turning a 24 pitch to the limiter then you would want to drop down to a 23 TXP to maintain the same rpm ranges.

  5. Member
    Join Date
    May 2009
    Location
    Hendersonville, TN
    Posts
    4,364
    #5
    I would run an OMC prop, 22-24 Raker for best top end.

  6. Member
    Join Date
    Oct 2019
    Location
    Breaux Bridge, Louisiana
    Posts
    20
    #6
    thnks