Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Oct 2014
    Location
    Texas
    Posts
    400

    Lynx with 2 blades

    I have a Lynx ordered with two 8 ft blades. Before I start moving some cabinetry in my garage could someone with a Lynx and two blades measure the distance between their two blades. I have 70 inches of clearance for the two blades. Thank you.

  2. Moderator Fishysam's Avatar
    Join Date
    Oct 2016
    Location
    Jamestown North Dakota
    Posts
    9,318
    #2
    Old boat have blades on it? How much clearance was there? Reason I ask is the amount of twist/ extension isn't much different and the width of the Jackplates is nearly identical as well. So if you had 5" your still good.
    Mercury 250 proxs 2B115089

  3. Member
    Join Date
    Dec 2009
    Location
    Midlothian, Texas
    Posts
    151
    #3
    47" between outside edges. This is with the short brackets, about 9-1/2" out from the jackplate. 8' blades.

  4. Member
    Join Date
    Oct 2014
    Location
    Texas
    Posts
    400
    #4
    Thank you gentlemen.