The sticker on my trailer says my bearings/lube are lifetime. WTH does that mean ? 5,000 miles or 500,000 miles ? Anyway I decided to "service" them. The center caps had slid inward or become flush which is supposed to be an indicator the lube level was getting low. So I ordered bearings, seals, and lube from Waymire distributors and went to work. Got all four done but I still had a couple wheels slinging grease. Last summer the boat was in the shop for some work and I had them "repack all four wheels again. I still have a couple wheels slinging grease and want it fixed.
On my hubs you have to hand pack the bearings and the cavity and then slide the hub on, and then slide on the outer bearing, and then drive on the outer cap. The spindle has no grease zerk. It's a PITA. I want to take this trailer to a shop, preferably a wheel/trailer shop as opposed to a boat service/dealer. I live north of Portland so a shop in or around Nashville and or Bowling Green would be suitable. I want these wheels serviced "right" and be done with it for a few years. Anyone got suggestions for a shop that is well qualified to service my hubs ?