I just bought a 2019 Nitro Z20 with a 250hp pro-xs 4 stroke. I installed the vesselview module and app and everything seems to connect and work except for the coolant pressure. It is constantly at 0. The physical gauge on my boat dash seems to work as it should but not on the vesselview. Anyone had this happen or have any ideas as what to check?
I don’t think a water pressure sending unit is standard equipment on the motor. If you want it on your Vessel View you’ll need to install the sensor.
Yep have to install the digital sensor/sender on the motor.
2022 Phoenix 919 Pro XP
2022 Mercury 225 4s 3B133405
If you would, please take a moment to review the Announcements at the top of the Forum, and be sure to provide the REQUIRED info when posting. Thanks!
As stated above, an optional Block Pressure Sensor is required to view Water Pressure.
There is also an optional setup so that you can utilize BOTH Analog and Digital Water Pressure:
Digital and Analog Block (Water) Pressure- Alternative Method for V6/V8 Models
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
pretty simple job. Don can get you everything you need.
2019 z18 175 ProXs 4 stroke, DC, 10 Ft Power Pole Blades, Relion lithium batteries, Ghost trolling motor, Lowrance Live's, SS structure, Airmar TM150, Vessel View Link, PowerPole Charge.
Do you need a harness added or is it already there?
Wiring is already there
2020 Nitro Z20 250 Pro XS
Reply With Quote
