Jack Plate opinions

[Mygreenihc]

Hey guys,

I have a 2016 Bullet XRS with a 250 ProXS. It came with a 14 inch manual jackplate and I have a brand new 4" Atlas hydraulic plate that I want to mount. From what I understand, Bullet does not warrant the transom with anything beyond 14 inches, so I guess I need to remove the 14 inch plate and replace it with a 10 inch plate.

My question is whether I should buy another 10 inch manual plate, but i will not need the adjustment. Is a better route to buy some sort of a 10 inch spacer?

What would you guys recommend?

Brad

[av]

Atlas 8" extension will be all you need ,

[Sleepy111]

What AV said, atlas has different size spacers just for the situation you are in. I’m doing the same but I’m going to a full Bobs 14” action jac.

[rocketmanjp]

I would call Steve @ Hydro Dynamics and see if he can make you some 10” side plates to convert what you have.

[Bkt1]

I would go with a new bobs action plate and sell both jack plates you have.... thats just my opinion tho. I dont like the way atlas has the extensions.