Results 1 to 4 of 4
  1. 01-26-2020, 05:45 PM #1
    wtf242
    wtf242 is offline
    Member
    Join Date
    Apr 2017
    Location
    Austin, TX
    Posts
    4

    Electrical Keypad issues on a 2017 V20

    Last week I took my boat out and noticed that my dashboard graph wouldn't turn on. I noticed that the breaker had flipped. I reset it, and the graph turned on fine, but now the dashboard and bow keypads do not work at all. I unplugged and plugged them back in, and I checked every fuse in the boat with a multimeter and they are all fine.

    Are there any hidden fuses that might be hard to see or get to that I might have missed? Any other ideas?

    thanks!
    Reply With Quote Reply With Quote
  2. bossbowman
    bossbowman is offline
    Banned
    Join Date
    Nov 2018
    Location
    Texas
    Posts
    3,824
    #2 02-06-2020, 09:16 PM
    When you say breaker I assume you mean the one back by the battery, if you can't get it to work I would call QC fiberglass.
    Reply With Quote Reply With Quote
  3. steve m 1234
    steve m 1234 is offline
    Member
    Join Date
    Jan 2010
    Location
    townsend
    Posts
    656
    #3 02-09-2020, 09:39 AM
    Check to see if you have voltage at keypads,if so check for resistance across power on/off if OL in both positions your keypad is bad.
    Reply With Quote Reply With Quote
  4. thedude
    thedude is offline
    Member thedude's Avatar
    Join Date
    Sep 2005
    Location
    Lowell, MI
    Posts
    1,271
    #4 02-10-2020, 09:45 AM
    those keypads flashing are a breaker built into the box. its a digital fuse you're blowing, so there's likely a short somewhere.

    there's also a breaker in the rear of the boat (not sure where on v20) that may have blown.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »