-
So i plugged the panoptix plug into the 93+ unit, tried to plug other end into LS
Module, but the plug is male and the end of the cable is also male. The panoptix cable DOES connect with the blackbox in the network port, right? Mine wont. Any ideas? Thanks.
-
Lowrance/Garmin/GPS Moderator
Are you using the cables that came in the box???
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
-
Yes I am. This cable im referring to is only 14 inches long or so.
-
-
A picture of the 2 cable ends.
-
Lowrance/Garmin/GPS Moderator
That looks like the adapter cable....There should be another cable that connects to the small end and goes to the box......
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
-
There is a longer (6 foot, I forget the exact length) network cable that came with the PLS. It has the RJ-45 square internet plugs inside a circular shell on both ends. I mean, both ends look like the top one in your picture. If you look at the cradle for the 93sv, you will notice it only has circular connectors. The short adapter cable shown in your picture is used to connect the long network cable that goes from GLS10 to your 93sv. Savvy?
-
You need 2 cables connected together for that connection
Reply With Quote