The product manual for Solix on page 210 for side imaging references the sharpness setting. Was this option removed or replaced?
The product manual for Solix on page 210 for side imaging references the sharpness setting. Was this option removed or replaced?
I have the first generation SOLIX SI and it has the Sharpness setting. It's the next item under Sonar Colors.
BUT to have the extra customizable settings you have to be using the User Mode Custom setting
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Thanks Wayne, user mode was my issue.
Wayne, do you get much use out of the "sharpness" setting ?
Wayne Purdum
Charlottesville, Va.
Helix 12 CHIRP MEGA+ SI G3N/G4N, Helix 15 CHIRP MEGA SI+ GPS G4N
SOLIX 12 SI/G3, Helix 8 CHIRP MEGA SI+ G4N, Ultrex 80/LINK, MEGA360,
MEGA LIVE, LIVE TL
Solix 12 Gen2 Mega+ SI, Helix 7 DI G3, Helix 10 G3N SI +, Helix 9 G3N SI +.
Upgraded to Mega imaging from a HDS-12 Carbon
I'm not Wayne but I have done a lot of "playing around" with the sharpness settings in DI & SI. The value really depends on what you are trying to "bring out". Setting a Low or Medium sharpness does a good job of highlighting things in the water column but, for me, it makes the structure and bottom too grainy. I prefer the more smooth appearance without any sharpness setting. I personally haven't really found a use for the "High" sharpness as it is really grainy.
---> Regards, Steve Yarbrough (AKA: SLYDoggieTN on YouTube)
- Apex 19/16/13, Mega 360, and Mega Live
- Minn Kota Ulterra Quest Trolling Motor
- (2) Cannon Optimum Bluetooth Downriggers
- Impulse Lithium Batteries... 36V 60AH for Trolling Motor, (2) 12V 120AH for Cranking & Electronics, 12V 60AH for Downriggers