Does anyone know what the width is of the trailer for the Pantera Classic?
Does anyone know what the width is of the trailer for the Pantera Classic?
I remember reading somewhere that it was built in combination with the hull to be under 96” wide with the intention of making it easier for backing through smaller garage doors.
2015 Phoenix 819
On the 3" frame, we can get it down to 96". On the upgraded 4" frame trailer, we are looking right at 100", but can bring that in a couple of inches if need be per request.
Not to hijack this thread, but can the 4" trailers be shortened any?
Brad Krone
Shortened is a bit of a different task, Brad. The short answer on that would be no. Different process to make it more narrow.
I have a narrowed trailer under a 2015 P2. Works great
2000 Triton Tr21
2002 Mercury 250 Pro XB
What is the width of a P2 on the trailer?
Also. When making the trailer more narrow. Is that accomplished with the steel of the trailer? Or is it changing the fenders and tires?
The width is changed by narrowing the actual frame and raising the boat. It is not a lighter frame on any and they are full C channel in the frame variations. C channel in 3” is 3” vertical, 4” is 4” vertical and etc.
If you need a picture of my boat sitting on the trailer just pm me your cell phone number or email and I’ll send pictures. It works great
2000 Triton Tr21
2002 Mercury 250 Pro XB
Pm sent!