New TM Wiring

[DaveLujano]

I am going to upgrade my TM this winter for next year. Plan to upgrade to either a 24volt TM or run 2 12 volt batteries to my current TM. Either way, I need to run larger wiring from the batteries in the bilge area to the bow. Currently I have what looks like either 12 or 14 Ga wire. Tiny wires. I am reading that I need to run anywhere from 8ga wire to 2ga wire. What size is really needed? And how do I attach wires that are that big to the plug? It is about 18 feet of wire each, both positive and negative. ??

[Bill Reynolds]

This link will be helpful.

https://www.minnkotamotors.com/suppo...on-and-rigging

[TableRock Coral]

I would also replace the existing plug (connector) with a high current capacity connector, such as the Battery Tender DC Power Connector. It will minimize voltage drop across the connector. The cables can be connected using ring terminals. https://www.amazon.com/Battery-Tende...37473853&psc=1

[schinkr1]

I've always had 6 AWG in my boats for the trolling motor (24v and 36v) and never had an issue. You can probably get away with 8 AWG for 24v. Eliminate the plug and go with a terminal connector like this:
https://trollingmotorparts.com/troll...erminal-block/

[mxmike]

Ya go with #6 AMG Tinned Marine wire. May also need to replace your plugs with larger ones.(wouldn't hurt)

http://www.genuinedealz.com/6-2-awg-...-red-by-the-ft

E Bay has it also.