Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jan 2013
    Location
    Virginia Beach, VA
    Posts
    821

    USA ELITE TI QUESTION

    Good morning all....

    I am thinking about replacing my 9ti with a 12TI2 on the console of my Z-19. I currently am running 2 9 inch tis on bow and console networked with NEMA.

    What would be the best way to set up...use new transducer that comes with 12 on transom and then I would have to hook it up to Nema to work with front 9ti...

  2. Member
    Join Date
    Nov 2013
    Location
    Norway
    Posts
    3,673
    #2
    Correct. :)

  3. Member
    Join Date
    Mar 2014
    Location
    edmond, ok.
    Posts
    1
    #3
    TI came with total scan trans and TI 2 comes with a similar but better trans simply called 3 in 1. TI 2 will show a clearer image with the new 3 in 1 but the TI can only be as good as the image you get with the total scan even if you have the 3 in 1 plugged to it.
    The 2 units will network together through nmea but that will only allow sharing waypoints, routes, trails and any nmea devices. Each unit will need its own transducer as they will not share that.

  4. Member
    Join Date
    Jan 2013
    Location
    Virginia Beach, VA
    Posts
    821
    #4
    THanks for the feedback!