Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Aug 2017
    Location
    Elk Grove, CA
    Posts
    12

    1998 Skeeter zx 202c

    I purchased a 98 zx 202c which is is really good condition except for the dash wiring. I am looking for a wiring diagram along with any info regarding the wire colors to the switches. The previous owner had attempted to replace the switch panel along with adding toggle switches which didn’t work! I’ve replaced the panel using new plastic material suggested by Tap Plastics. I’ve also installed new rocker switches as well! I really appreciate any advice or help! Thanks a bunch!

  2. Member
    Join Date
    Aug 2018
    Location
    1000 Islands, Ontario
    Posts
    968
    #2
    This info may help you, depending on what the previous owner did. My 2002 ZX still has the original touch pad, working fine, but in case it quits I've checked out my wiring colors to help me later. These are the wires going from the computer (after the touch pad) to the fuse panel:
    Red/Orange stripe...touchpad power switch
    Blue/Black stripe...Courtesy lights
    Grey/Black stripe...anchor light
    Grey/Green stripe...navigation lights
    Pink/Black stripe...port fuel level
    Pink/White stripe...starboard fuel level
    Brown/Red stripe...port fill pump
    Brown/Beige stripe...starboard fill pump
    Brown/Black stripe...starboard recirc. pump
    Brown/ White stripe...port recirc. pump
    Brown...starboard bilge

    A few months back I talked to Derek at this email address: affordabletungsten@yahoo.com
    He has successfully changed his over from touchpad to switches and might be willing to share info with you...
    Last edited by McQuaig; 01-14-2020 at 06:58 AM.
    2002 Skeeter ZX200
    2018 200SHO