Best Transducer mount for 921

[artdevilish]

WIth the atlas hydraulic. Currently it is just mounted on the transom (2 in 1 lowrance)

[fishin couillon]

I'd say the Transducer Shield and saver......

[artdevilish]

side mount?

[txbass1]

I'd say the Transducer Shield and saver......

+1 How I have mine mounted to jack plate- and they have wedges to level it out

https://www.transducershieldandsaver...tegory/wedges/

[DREWTICK]

with Atlas you will need this https://www.transducershieldandsaver...rackets/atlas/

if its already mounted I would probably leave it, it would be hard to knock it off where Phoenix puts it under the Atlas but that bracket listet will do the trick along with the shield mount

[fishin couillon]

I believe the Atlas can have a hole shot plate added to it, so there are two choices, the wedge that would go under the hole shot plate OR the one for the side.....its up to you....

[artdevilish]

I spoke with the young lady at transducer shield and the hole shot plate won’t work for atlas. That’s how I had the others mounted. They quit making the big wedge

[fishin couillon]

Ok....didnt know....well side mount it is....

[DREWTICK]

I believe the Atlas can have a hole shot plate added to it, so there are two choices, the wedge that would go under the hole shot plate OR the one for the side.....its up to you....

when the atlas goes down it could hit the transducer on the hole shot plate

[artdevilish]

when the atlas goes down it could hit the transducer on the hole shot plate

Someone I trust told me to keep it where the factory mounted it.

[fishin couillon]

Gotcha.....

[artdevilish]

Actually it was drewtick