composite reed valves and injector service

[ChrisCarsonMarine]

Composite reed valves and injector service

We have reed valves for pretty much any 2 stroke,and crankcase stuffers for lots of outboards.We service fuel systems for most outboards,including injectors,vst's,fuel rails and regulators.
When is the best time to change reeds and service injectors?Before a broken reed or lean injector causes a powerhead failure.Chipped reeds and dirty injectors reduce power and efficiency,while raising emissions.
Message or call,Best quality,price,and fast turnaround,Chris
chriscarsonmarine.com

[omcforever]

Love my Chris Carson reeds,,,woke the ole crossflow up.

[ChampioNman]

Thanks Chris! Good to hear from you!! Can you do Ficht and ETEC injectors??

[mactlman]

is there reed upgrades for 200hp fichts that currently run very well?

[ChrisCarsonMarine]

Great reeds for the Ficht ,125$

[ChrisCarsonMarine]

Thanks Chris! Good to hear from you!! Can you do Ficht and ETEC injectors??

hi Fred,working on it,but not quite yet

[mactlman]

Great reeds for the Ficht ,125$

what does it improve? part numbers so I can find them?

thks

[omcforever]

what does it improve? part numbers so I can find them?thks

Idle smoothed out and is awesome. Mid range punch is stout now. Mine is carbed so your results may vary...

[JoePA]

I installed Chris's reeds In my 04 DI and it has a nice mid range hit as well. Out of the hole is almost instant with 2 people where before it took a second or two longer. Very pleased with how well they perform.

[ChrisCarsonMarine]

what does it improve? part numbers so I can find them?

thks

166S is the reed part no.,if you want the necessary gaskets the kit is 30$,162 reeds/gaskets delivered,Chris

[mactlman]

166S is the reed part no.,if you want the necessary gaskets the kit is 30$,162 reeds/gaskets delivered,Chris

can they be changed without messing with much like oil lines and such? 20 yr old motor, dont want to open too many cans of worms!! thks mike

[ChampioNman]

Throttle bodies and intake manifold has to come off, new gaskets for the reed cages, intake upper/lower and throttle bodies.

[Double Trouble]

Throttle bodies and intake manifold has to come off, new gaskets for the reed cages, intake upper/lower and throttle bodies.

Is it pretty straight forward install does anything have to be machined before it goes back on?

[Double Trouble]

Which kit for 2000 2oohp ficht?

[ChrisCarsonMarine]

Which kit for 2000 2oohp ficht?

no machining necessary,162$ for reeds and gaskets delivered...call to order

[Double Trouble]

no machining necessary,162$ for reeds and gaskets delivered...call to order

Thanks will call in the spring.

[mactlman]

Throttle bodies and intake manifold has to come off, new gaskets for the reed cages, intake upper/lower and throttle bodies.

sounds easy thks
mike

[Double Trouble]

When reinstalling do I need to use gasket sealent or adhesive?

[ChrisCarsonMarine]

No sealer on gaskets,blue locktite on reed screws

[Double Trouble]

No sealer on gaskets,blue locktite on reed screws

Thank you.