Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Mar 2014
    Location
    Waverly, Iowa
    Posts
    236

    Legend Alpha 199 Wiring Diagram

    Anyone know if a wiring diagram is available for a Legend Alpha 199? Did a quick search here and haven't found anything. I just upgraded to an Ultrex and was thinking about adding a panel up front for battery hookups so I don't have to run wires all the way back any time I add something up there. Might be a good time to upgrade the wiring while I am in there too.

  2. Member
    Join Date
    Jul 2015
    Location
    Crossville, TN
    Posts
    532
    #2
    https://issuu.com/legendboats/docs/legend_owners_manual

    I found this the other day. Have some wiring in it
    2013 Legend 211R
    2017 Ford F-150 Ecoboost



  3. Member
    Join Date
    Mar 2014
    Location
    Waverly, Iowa
    Posts
    236
    #3
    Thank you!

  4. Member thedude's Avatar
    Join Date
    Sep 2005
    Location
    Lowell, MI
    Posts
    1,271
    #4
    here is a full wiring schematic i procured from legend a few years ago for 199/211.
    https://drive.google.com/open?id=0B3...5qOUJtTzhNcXpF


    adding battery hookups - i assume for things like a graph/accessory and what not. ACC1-4 are wired from the console to the bow and then back around to the end of the passenger rod locker. you can tap into any one of those wires for switched 12v.

  5. Member
    Join Date
    Mar 2014
    Location
    Waverly, Iowa
    Posts
    236
    #5
    Quote Originally Posted by thedude View Post
    here is a full wiring schematic i procured from legend a few years ago for 199/211.
    https://drive.google.com/open?id=0B3...5qOUJtTzhNcXpF


    adding battery hookups - i assume for things like a graph/accessory and what not. ACC1-4 are wired from the console to the bow and then back around to the end of the passenger rod locker. you can tap into any one of those wires for switched 12v.
    Thanks Dude! I was thinking of adding unswitched power as it will be hooked to my Ultrex heading sensor and I could see myself forgetting that it was switched, but maybe I will just swap my electronics (unswitched other than main power) and hook those to ACC1. I will definitely remember to turn those on I would think!

  6. Member thedude's Avatar
    Join Date
    Sep 2005
    Location
    Lowell, MI
    Posts
    1,271
    #6
    i currently have my graphs wired into their own run of 10ga wire. however, i run a heavy duty off-road lights relay from ACC1 to turn on the power to that line (still direct connection to battery, power is switched form acc1 however). I ran my ultrex sensor to acc1 that since my graphs are always on. Also if you don't use the link to HB or jog feature, you don't need the heading sensor for anything.

  7. Member
    Join Date
    Mar 2014
    Location
    Waverly, Iowa
    Posts
    236
    #7
    Quote Originally Posted by thedude View Post
    i currently have my graphs wired into their own run of 10ga wire. however, i run a heavy duty off-road lights relay from ACC1 to turn on the power to that line (still direct connection to battery, power is switched form acc1 however). I ran my ultrex sensor to acc1 that since my graphs are always on. Also if you don't use the link to HB or jog feature, you don't need the heading sensor for anything.
    Ya I doubt that I will need it, but I'll probably hook it up in case I want to try jog. So you have the graphs and sensor both switched from acc1, am I understanding right? Not a bad idea there.

  8. Member
    Join Date
    Dec 2015
    Location
    Lake Charles, La
    Posts
    42
    #8
    Quote Originally Posted by thedude View Post
    here is a full wiring schematic i procured from legend a few years ago for 199/211.
    https://drive.google.com/open?id=0B3...5qOUJtTzhNcXpF
    Do you still have this? The link is not working.

    thank you