Whats up everyone, hoping don or joe can help me with a couple issues I got,
Engine info 1995 200 XRI efi, serial#OG130941 installed CCR reeds, injectors gone through by Don, still has oil injection system.
Ok 1st problem: Went to lake the other day, temperature was high 40s water temp was 49, launched boat left motor idling to warm up while I parked truck and trailer. Water pressure was like 5 psi idling at around 850-900. Seemed good to me, got out of no wake zone and hammered it, got up on plane and alarm started beeping overheat, backed off to 3500 and it stopped, hammer back down above 5000and overheat alarm again, water pressure was 15-18 at wot 5800-5900. But stopped, fished for an hour and started up and took off and alarm never went off again for the rest of the day lol. Hoping I change water pump and impeller it will fix that. What do you all think?
2nd issue: same day I noticed at around 3500 motor had a miss, ran rough, but idled perfectly, holeshot was instant and above 4000 ran like a top!! Can't think waht it would be!! Confident you guys can help me out here Thanks!!