Breaker bar. Socket. Short extension. 2x4 block of wood for Prop while removing or installing.
Keep it all in the locker behind passenger seat along with an extra hub kit.
Breaker bar. Socket. Short extension. 2x4 block of wood for Prop while removing or installing.
Keep it all in the locker behind passenger seat along with an extra hub kit.
2016 BassCat Pantera II
Mercury 200 ProXs
I do have the extra hub kit.....got the breaker bar today, need to get my sockets next....
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
As per installation instructions that come with my Flo Torq II Surfacing Hub Kit (Tempest, Trophy, Fury) 835257K6 torque at 55 lbs/ft.Originally Posted by Fish TR19
You might want to read your flo torq instructions again. It's most definitely 100 ft lbs
2020 Nitro Z20 250 Pro XS
make dang sure and read the instructions for the one you have..!!
Not all FlowTorque hubs are 100. ft lbs !!
^^^ This^^^
Don't waste your money on plastic or nylon wrenches. Get a 1-1/16" socket (I prefer deep) and an old ratchet or breaker bar to keep in the boat.
If you can get the prop nut loose with a nylon prop wrench, it probably wasn't torqued properly to begin with.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 47 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
