Results 1 to 6 of 6
  1. #1
    Member gatorz's Avatar
    Join Date
    Apr 2011
    Location
    Flagler Beach, Fl
    Posts
    324

    VX20 measurement (garage question)

    Thinking very seriously about this model. Going to see one soon at my local dealer to get an up close and personal look. Wondering if somebody can share the tongue open measurement front to back with a SHO trimmed down. I see a length on the website, but not sure what motor was used. Wondering if I will still have room to walk around the back of the boat. My garage measures approx 26'6" deep with the garage door closed.

    Thanks guys
    2021 Vexus VX20, Yamaha 250 SHO

  2. Moderator Vexus Boats sclark's Avatar
    Join Date
    Dec 2004
    Location
    Flippin Arkansas
    Posts
    13,558
    #2
    That measurement was with a mercury motor and no jackplate.

  3. Member
    Join Date
    Dec 2016
    Location
    ENC
    Posts
    529
    #3
    Quote Originally Posted by sclark View Post
    That measurement was with a mercury motor and no jackplate.
    Were Mercury motors used in all the measurements? I’m in a similar position, but with a different Vexus boat (1989CC).

  4. Moderator Vexus Boats sclark's Avatar
    Join Date
    Dec 2004
    Location
    Flippin Arkansas
    Posts
    13,558
    #4
    Not sure about the AVX boats i was not present when they were measured. they would have been either Mercury or Evinrude's

  5. Member gatorz's Avatar
    Join Date
    Apr 2011
    Location
    Flagler Beach, Fl
    Posts
    324
    #5
    Quote Originally Posted by sclark View Post
    That measurement was with a mercury motor and no jackplate.
    Thank you, can you tell me what size/setback would be recommended for an Atlas Hydraulic? I will be getting a SHO so I know that should add another 3" approx, so interested in what the jack plate will add.
    2021 Vexus VX20, Yamaha 250 SHO

  6. Member gatorz's Avatar
    Join Date
    Apr 2011
    Location
    Flagler Beach, Fl
    Posts
    324
    #6
    Quote Originally Posted by gatorz View Post
    Thank you, can you tell me what size/setback would be recommended for an Atlas Hydraulic? I will be getting a SHO so I know that should add another 3" approx, so interested in what the jack plate will add.
    Never mind, I was able to obtain the information needed from my local dealer.
    2021 Vexus VX20, Yamaha 250 SHO