2022 Hog Island Skiff
Johnson 70/40 jet
Bouncin' off rocks, and catching the smallies.
Potomac River Smallmouth Guide
Owner of Potomac Custom Tackle
Probably need a flat or offset trim tab or trim the one you have.
Any issues with just trimming down the tab?
2022 Hog Island Skiff
Johnson 70/40 jet
Bouncin' off rocks, and catching the smallies.
Potomac River Smallmouth Guide
Owner of Potomac Custom Tackle
Cut your trim tab flat off.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
2022 Hog Island Skiff
Johnson 70/40 jet
Bouncin' off rocks, and catching the smallies.
Potomac River Smallmouth Guide
Owner of Potomac Custom Tackle
No sir. it will be just fine.
Perfect. Thanks guys
2022 Hog Island Skiff
Johnson 70/40 jet
Bouncin' off rocks, and catching the smallies.
Potomac River Smallmouth Guide
Owner of Potomac Custom Tackle
I think I would sell that prop to me for twice what you paid for it. If it were me, I would not cut it flat but cut it back on an angle to fit plus 1/4" or so. I had to do that to my old Johnson 60HP.
2013 Lund 2010 Pro Guide, 150 Verado SN:2B024387
2X Helix 12's Mega G2N's, Lvl. 2 Merc Monitor
They sell flat ones for this very thing. Or you can just cut yours for free. Lol
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
BTW... Props with big diameters and lots of rake cause this. They also make an off set tab... The flat one is just fine. You will probably want to remove all 4 pvs plugs.
Let us know how it runs... You might add more venting. I had Mark make my 25P Rev4 into a dual PVS 26P.. I hope to run it before the year end.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
is there a trick to getting the plugs out? small screw driver?
2022 Hog Island Skiff
Johnson 70/40 jet
Bouncin' off rocks, and catching the smallies.
Potomac River Smallmouth Guide
Owner of Potomac Custom Tackle
Sometimes I just push them through from the outside... Otherwise the prop has to come off and manipulate a flat screwdriver or similar to get them out.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html