Replaced the old Black/Blue plastic hoses with new Rubber Hose kit on my 2015 Phoenix. Power Pole hooked me up with a great deal by covering partial warranty on the kit. The original install ran line across splash well. Never liked the look plus the rigging tube was in contact with the starboard lines. I got some custom SS plates for hoses through Drew-Tek BBC board sponsor and had a local metal fab shop make a Mirror SS plate to cover old holes in splash well. Installed with 3M body molding tape and sealed all around with Boatlife clear silicone. The upgrade kit includes new stern brackets, Hyd. cylinders, and all the spacers plus hardware to rebuild the poles. Also, sent my pumps back for reconditioning and check over. Power Pole found one pump with an internal leak. Cleaned up both and sent two quarts of Hyd. fluid back all under warranty. Shipped pumps out on Monday USPS ground from NC and had all back by Friday the same week. Great Service! Only thing I would change is some shorter hoses since they come with fittings installed. 20191126_104523_resized.jpg20191224_091137_resized.jpg20191224_091021_resized.jpg20191224_091310_resized.jpg