I have always used the same IV Flo Torque on all my props. Am I correct in thinking the hub is purchased to fit the motor and not the Prop? I used to run a Tempest and now a Rev 4.
I have always used the same IV Flo Torque on all my props. Am I correct in thinking the hub is purchased to fit the motor and not the Prop? I used to run a Tempest and now a Rev 4.
2013 Lund 2010 Pro Guide, 150 Verado SN:2B024387
2X Helix 12's Mega G2N's, Lvl. 2 Merc Monitor
Pretty much, But all props dont use a flo torq hub.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Thanks, I should have clarified props that use flow torque hubs. I figured that was the answer but I have seen Flow torque boxes that specify a prop and not the gear case so the question was flouting around between my ears. I should have just had another beer and forgot about it.
Ches.
2013 Lund 2010 Pro Guide, 150 Verado SN:2B024387
2X Helix 12's Mega G2N's, Lvl. 2 Merc Monitor